banner
Home » Knowledge » Content
Product Categories

Installation of electromagnetic valve

- Apr 15, 2017 -

1, the installation should pay attention to the arrow on the valve body should be consistent with the flow of media. Do not install in places where there is direct dripping or splashing water. Solenoid valve should be installed vertically;

2, the solenoid valve should ensure that the power supply voltage for the rated voltage of 15% -10% fluctuations in the normal work;

3, the solenoid valve installed, the pipeline shall not have a reverse pressure. And need to power several times, so that the appropriate temperature before the official put into use;

4, the solenoid valve should be installed before the full cleaning of the pipeline. Access to the media should be no impurities. Pre-installed filter;

5, when the solenoid valve failure or cleaning, in order to ensure the system continues to run, should be installed bypass device.